Optipoint wl2 manual

Below, you will find the most frequently asked questions about the Siemens Optipoint Entry Is your question not listed? HiPath With Codes Ask a question. Do you have a question about the Siemens optiPoint standard or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Siemens optiPoint standard owners to properly answer your question.

View the manual for the Siemens optiPoint standard here, for free. This manual is available in the following languages: English. Copy from profile OK Select and confirm. Profile 3 OK Select and confirm. Save Settings OK Select and confirm. Save Press the softkey. Go to the field "Password:" and enter a password. Save Press the softkey and enter additional settings in the "Profile Selection" menu.

Select the Encryption Type Select an encryption method to protect wireless data transmissions in the "Encryption Type:" menu: 1. Select the desired Password mode. Setting up additional profiles In order to enable fast and simple access in case of multiple parallel WLANs you can set up a maximum of 16 different network profiles. Prerequisite: The handset must be in idle mode.

Open the main menu. OK Confirm by pressing OK. Complete the profile as described under "Set up and activate new profile" Page Accessing the hidden "Service" menu As you will have to press multiple keys simultaneously, we recommend that you place the handset onto a solid surface e.

Prerequisite: The handset is switched of. Press the key. M Press and hold keys simultaniously. Short press the key. The LEDs of the speakerphone key and mailbox key start blinking.

Enter Code "". Network Scan Re-Scan Scan for all available profiles. Go Back Close "Service" menu. Other settings in the "Service" menu Enter again Code "". Leave "Service" menu Long press key. The handset makes a restart. QS-Data This entry contains information regarding quality control during manufacturing for service personnel only.

Prerequisite: You are in the hidden "Service" menu Page Speechpath test Using this funciton the service personnel can do a quick check of the accoustic paths. Activate Speechpath test OK Select and confirm. Working time OK Select and confirm. Contrast This function is used to set the display contrast for your handset. Possible values: 1 low to 9 high. Contrast OK Select and confirm.

Select the desired value. Save Save settings. If this function is activated, a WPS server can identify the location of a handset using the data transmitted by the handset.

You can also access this function via the web interface Page Factory default OK Select and confirm. Yes Confirm. No Cancel, back to menu. Clean up OK Select and confirm. A warning message is displayed. Backlight Switch Using this function you can set the backlight duration when the handset is not used. Possible values: 5 to 60 seconds. Backlight Switch OK Select and confirm. Select desired value. Save Save setting. The chapter "Alphabetic Reference" Page 39 provides more background information.

The web interface provides unlimited access to all aministration menus. Administration of an optiPoint WL 2 professional is only possible while the telephone is in idle mode. The web interface contains the following form elements: Admin Click this link to access the relevant page.

Click this button to accept the changes in the current form. This transfers the changes to the optiPoint WL 2 professional. Click this button to reset the changes in the current form to the values currently stored in the optiPoint WL 2 professional.

Select an option from the list field. Admin Administration of the handset Page Logout When you have finished editing the settings, leave the Administration section through the "Logout" link in the Main Menu; otherwise the handset remains locked. Associated stations can only transfer data after the check was completed successfully.

Open system default process Any station can associate with an Access Point AP and receive unencrypted data. Page 27 Channel To make sure that different WLANs do not interfere with each other, the frequency range is divided into channels recommended distance: 3 channels.

All devices associated with a WAN have to use the same channel! The channel used by the handset for transmission is predetermined by the access point. The handset scans for an access point with the SSID set in the handset. If there are several access points using the same SSID on different channels within the coverage of the handset, the channel setting determines the selection of the access point.

The driver first attempts to locate the access point using the desired SSID on the desired channel. If this is not found, the driver searches the other channels. Settings for handset and network are not deleted. Codec Audio Mode G. The value is the ratio of packets lost to the total number of packets. If the value counted is higher than the selected value, the threshold value has been exceeded.

If the value counted is lower than the selected value, the threshold value has been excedeed. In case of an overload, excess data packets are lost packet loss. Using this function you can set the packet loss probability for each class Assured Forwarding : Low, Medium, High. For each WLAN device e.

The PMK is static and has to be entered manually on each client. The and has to be entered manually on each client. The reset can cause a complete failure of all functions of the optiPoint WL 2 professional. Please make sure you have all the necessary information for setting up the system again Page The current Firmware Version is displayed under "Current firmware:".

In a This manual is available in the following languages: English. Is your question not listed? Facility Interface Information Siemens optiPoint telephone connects to the public switched Disruption of the Network If the Siemens optiPoint telephone disrupts the telephone networ